Drywall profiles

Profiles for gypsum cardboard

Profiles CW 50 / 75 / 100​

Standard profiles for the construction of partition walls. The choice of profile width depends on the system used. Profiles of this type are produced in lengths of 2.6, 3.0, 3.5 and 4.0m

Profiles UW 50 / 75 / 100

Profiles attached to ceilings in partition wall structures. The width of the profile must be appropriate to the CW profiles used.

Profiles CD 60

The basic profile used in suspended ceiling structures and wall cladding. The profile is available in lengths of 3.0 and 4.0m

Profiles UD 30

Auxiliary wall profile used in suspended ceiling structures and wall cladding made of CD 60 profiles.

Profiles UA 50 / 75 / 100

Reinforced wall profiles used in partition wall structures as profiles framing door openings and in other places requiring reinforcement such as fixing sanitary racks. Profiles of this type are produced in lengths of 2.6, 3.0, 3.5 and 4.0 m

Hat profile

15mm thick profile used in wall and ceiling cladding systems when it is necessary to minimize the thickness of the building.


Corner with micro mesh

Corner aluzinc 25 x 25 mm

Aluminium half-corner

Aluminium corner

Aluminum corner with mesh

PVC corner for arches

PVC perforated corner

PVC corner with mesh


Cross connector

It is used to connect CD60 ceiling profiles perpendicularly with each other when installing suspended ceilings with a two-layer cross structure.

Longitudinal connector

It is used to connect CD60 ceiling profiles for their extension in all ceiling structures using CD 60 profiles.

Transverse connector

It is used when it is necessary to connect two CEILING profiles type CD60 at right angles.

Direct hanger click-fix

It is used to attach the CD60 type profile directly to the ground: wall, ceiling, frame structure.

Rotary hanger with spring

It is used for hanging the structure of suspended ceilings from CD60 profiles on hanger bars. Fastening the hanger into the profile takes place by turning it by 90 degrees.

Hanger rod

It is used to suspend the ceiling structure at the right height under the ceiling. If the rod is too long, it should be cut to the appropriate length. Do not bend the rod under the hanger. Adjustment of the suspension height is made by pressing the spring of the hanger and moving it on the rod.

Double hanger spring

It is used for quick and reliable extension of hanger rods. Adjustment of the length is made by compressing the spring and moving the rod in the holes.

Holder ES 60-75/125

The basic application is the attachment of CD60 type profiles to the substrate in ceiling and wall cladding. The maximum distance from the wall depends on the length of the handle arms.

Attic hanger length 180 / 250 / 350

With this hanger, CD60 d profiles of wooden beam structures such as attic or structures of timber frame buildings are fixed.

Angle for UA profiles 50 / 75 / 100

Reinforced UA profiles used as a frame for door openings should be fixed to the ceilings using sufficiently durable angles.The angle should be used both when attaching to the floor and to the ceiling.